manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

E87786

4. Open the hood.  Support the hood with

the strut.

Closing the Hood

1.

Remove the hood strut from the catch
and secure it correctly after use.

2. Lower the hood and allow it to drop

under its own weight for the last 8-12
in (20-30 cm).

Note:

Make sure that the hood is correctly

closed.

UNDER HOOD OVERVIEW -
HYBRID ELECTRIC VEHICLE
(HEV)

WARNING

The inverter system controller
contains various high-voltage
components that can cause serious

bodily harm or death. The inverter system
controller is not serviceable and should
never be touched, probed, or tampered
with.

Note:

Do not attempt to service any of the

high-voltage components or wiring. For
easier identification, the high-voltage wiring
insulation is color coated orange.

219

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Maintenance

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Harken Hoister SUP Manual preview
SUP
Brand: Harken Hoister Pages: 12
Yamaha Raptor Instruction Supplement preview
Raptor
Brand: Yamaha Pages: 2
iDataLink maestro Rr Install Manual preview
maestro Rr
Brand: iDataLink Pages: 106
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
Chevrolet Malibu 2014 Owner'S Manual preview
Malibu 2014
Brand: Chevrolet Pages: 428
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
cam PFF Series Operating Manual preview
PFF Series
Brand: cam Pages: 28
Hyundai TUCSON 2022 Quick Reference Manual preview
TUCSON 2022
Brand: Hyundai Pages: 32
Air Lift RideControl 59540 Manual preview
RideControl 59540
Brand: Air Lift Pages: 10
Volkswagen RCD550 Installation Manual preview
RCD550
Brand: Volkswagen Pages: 4
Rand McNally tnd 760 User Manual preview
tnd 760
Brand: Rand McNally Pages: 60
Jeep 2010 Wrangler Owner'S Manual preview
2010 Wrangler
Brand: Jeep Pages: 554
Chrysler 2005 300 Manual preview
2005 300
Brand: Chrysler Pages: 374
Honda 2014 Accord Coupe EX Technology Reference Manual preview
2014 Accord Coupe EX
Brand: Honda Pages: 18
4x4Tough 15-50222 User Manual preview
15-50222
Brand: 4x4Tough Pages: 8
Toyota Bluetooth SWC Owner'S Manual preview
Bluetooth SWC
Brand: Toyota Pages: 212
Fab Fours JTOR-02 Installation Manual preview
JTOR-02
Brand: Fab Fours Pages: 14

Brands by name

Popular brands

Load more brands