manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Disconnecting the Charging

Coupler

Note:

Do not pull the wall plug from the

wall while the vehicle is charging. Doing so
may damage the outlet and the cord.

1.

Remove the lock from the charging
coupler button.

2. Press the button on the charging

coupler.

3. While holding the button, remove the

charging coupler from the charge port
receptacle on your vehicle.

E144781

4. Close the charge port door by pressing

the indentation on the charge port
door. Continue pressing the indentation
while the door rotates
counterclockwise and closes.

HIGH VOLTAGE BATTERY CUT-
OFF SWITCH

The high-voltage shut off operation shuts
off power from the high-voltage battery
after a collision, or if your vehicle receives
a substantial physical jolt.

To reactivate your vehicle after either
event, perform the following steps:

1.

Turn the ignition off.

2. Turn the ignition on.

3. If your vehicle is not powered after this

sequence, repeat steps 1 and 2 up to
two more times.

For vehicles equipped with a push button
start system:

1.

Press the 

START/STOP

 button to

turn ignition off.

2. Press the brake pedal and press the

START/STOP

 button.

3. If your vehicle is not powered after this

sequence, repeat steps 1 and 2 up to
two more times.

Note:

During this process, your vehicle will

detect if the electrical system is safe and
reactivate. Once your vehicle determines
the electrical system safe, you can start your
vehicle as you would normally by either
turning the ignition key or by pressing the
brake in combination with the

START/STOP

 button.

Note:

In the event your vehicle does not

reactivate after the third key cycle, contact
an authorized dealer.

160

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

High Voltage Battery

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

KC HiLiTES C Series Wiring Diagram preview
C Series
Brand: KC HiLiTES Pages: 4
Samsung HF1000 User Manual preview
HF1000
Brand: Samsung Pages: 133
Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
K&M 8494 Installation Manual preview
8494
Brand: K&M Pages: 3
Alpine eX-10 Owner'S Manual preview
eX-10
Brand: Alpine Pages: 69
Allen Sports S302 Instructions preview
S302
Brand: Allen Sports Pages: 2
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
AEM 30-3500 Instruction Manual preview
30-3500
Brand: AEM Pages: 27
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
Waeco Magic Watch MWE-850-4DSM Installation And Operating Manual preview
Magic Watch MWE-850-4DSM
Brand: Waeco Pages: 204
Ford ALCON 1968 Owner'S Manual preview
ALCON 1968
Brand: Ford Pages: 52
Jeep CHEROKEE 2017 User Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 374
TATA Motors Harrier 2021 Owner'S Manual preview
Harrier 2021
Brand: TATA Motors Pages: 308
Guardsman G14776S Fitting Instruction preview
G14776S
Brand: Guardsman Pages: 2
Chrysler Sebring Convertible Owner'S Manual preview
Sebring Convertible
Brand: Chrysler Pages: 454
Honda Vezel Owner'S Manual preview
Vezel
Brand: Honda Pages: 279
ECS Electronics TO-245-BHU Fitting Instructions Manual preview
TO-245-BHU
Brand: ECS Electronics Pages: 14
Mini Countryman Cooper S Owner'S Manual preview
Countryman Cooper S
Brand: Mini Pages: 244

Brands by name

Popular brands

Load more brands