manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Maintenance

Action

Message

Stop the vehicle as soon as safely possible, turn off the engine.
Check the oil level. If the warning stays on or continues to
come on with your engine running, contact your authorized
dealer as soon as possible.

Low Engine Oil Pressure

Displayed when the engine oil life remaining is 10% or less.
See 

Engine Oil Check

 (page 222).

Change Engine Oil Soon

Displayed when the oil life left reaches 0%.  See 

Engine Oil

Check

 (page 222).

Oil Change Required

Indicates the brake fluid level is low and the brake system
should be inspected immediately.  See 

Brake Fluid Check

(page 227).

Brake Fluid Level Low

Displays when the brake system needs servicing. Stop the
vehicle in a safe place. Contact your authorized dealer.

Check Brake System

Displays when the engine coolant temperature is excessively
high.

Engine Coolant Over

Temperature

Displays when the motor coolant temperature is excessively
high.

Motor Coolant Over

Temperature

Displayed when the kit needs service. See your authorized
dealer.

Service Tire Mobility Kit

Informs the driver that the powertrain needs service due to a
powertrain malfunction.

See Manual

Displays when EV functionality is disabled and the engine is
running to maintain oil quality.  See 

Plug-In Hybrid Vehicle

Operation

 (page 137).

Engine ON Due to Low

Use Normal Operation

MyKey

Action

Message

Displayed during key programming when MyKey cannot be
programmed.

MyKey not Created

Displays when MyKey is active.

MyKey Active Drive

Safely

Displays when a MyKey is in use and the MyKey speed limit is
on and the vehicle speed is approaching 80 mph (130 km/h).

Near Vehicle Top Speed

105

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Information Displays

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
Ranger design 5044 Installation Manual preview
5044
Brand: Ranger design Pages: 6
Safe Fleet RVS-082550 Instruction Manual preview
RVS-082550
Brand: Safe Fleet Pages: 11
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
EUFAB 11556 Operating Instructions Manual preview
11556
Brand: EUFAB Pages: 52
PAC GM1A-R Quick Start Manual preview
GM1A-R
Brand: PAC Pages: 4
Thule Kit 1429 Fitting Instructions Manual preview
Kit 1429
Brand: Thule Pages: 8
Jeep Cherokee 1977 Owner'S Manual preview
Cherokee 1977
Brand: Jeep Pages: 136
I.D. Systems Vehicle Asset Communicator User Manual preview
Vehicle Asset Communicator
Brand: I.D. Systems Pages: 41
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
Anker Technology Roav VIVA Owner'S Manual preview
Roav VIVA
Brand: Anker Technology Pages: 8
Discount Car Stereo A2DIY-MBR Quick Start Bluetooth Installation Manual preview
A2DIY-MBR
Brand: Discount Car Stereo Pages: 8
Acura RLX 2016 Service Bulletin preview
RLX 2016
Brand: Acura Pages: 7
ECS Electronics CT-050-B1 Fitting Instructions Manual preview
CT-050-B1
Brand: ECS Electronics Pages: 42
Classic Accessories OVER DRIVE PolyPRO 3 Car Cover Instructions preview
OVER DRIVE PolyPRO 3 Car Cover
Brand: Classic Accessories Pages: 2
BMW 325i 1991 Electrical Troubleshooting Manual preview
325i 1991
Brand: BMW Pages: 64
DICE DCR-150 Installation Manual preview
DCR-150
Brand: DICE Pages: 1
Hudson Super-Six 1926 Instruction Book preview
Super-Six 1926
Brand: Hudson Pages: 24

Brands by name

Popular brands

Load more brands