91
9-5. How to Reset the WIPE Menu
To Reset a Modified Pattern using the WIPE PATTERN Menu:
(1) Press PATTERN in the TRANSITION block to display the [WIPE PATTERN] menu. The
letter "M" appears in front of the modified pattern.
WIPE :BKGD :KEY1 :KEY2 : 1/1
PAT M1 :00 :M20 :00 :
(2) Press and hold down F2 to reset Pattern 20 in the above example.
To Reset a Modified Pattern using User Buttons:
(1) Assign the reset function of the WIPE menu (OTHER - WIPE MOD BKGD RESET, WIPE
MOD KEY1 RESET or WIPE MOD KEY2 RESET) to a USER button.
(2) Press a set USER button. All parameters for the selected bus in the WIPE menu are returned
to factory default settings. (See section 22. "USER Button.")
To Reset a Part of the Modified Pattern using the WIPE Menu:
The INIT items in the menu allows the user to reset a submenu respectively in the WIPE menu.
(1) Press M/E1 in the WIPE CHANNEL block to turn on the lamp of the bus where the pattern is
used.
(2) Press MENU in the CONTROL block.
(3) Press WIPE in the Keypad to display the [WIPE] menu.
(4) Turn F1 to select INIT. And then press and hold down F1 for a while.
ME1 WPBG:>BORDER >POS/ASP >CROP >SUB EFF
No.117 :>CG WIPE >
INIT
(5) Turn F1 to select the parameter group you want to reset under
INIT
. Press F1 to reset the
selected parameter values.
ME1 WPBG:INIT : : 1/1
INIT :=
BORDER
: :
‚b‚t‚s
‚c‚d‚k
‚`‚c‚c
BLACK
TRANS
SEQUENCE
EVENT
WIPE
MENU
USER BUTTON
MEMORY
CONTROL
MACRO
SEQ EDOT
COPY/SWAP
7
8
9
4
5
6
1
2
3
ATTATCH
INC
COPY
SWAP
STILL
NEW
FILE
MATT
SETUP
M/E1
DETTACH
DEC
KEYER
(2D DVE)
ROT
POS
WIPE POS
MENU
FINE
DEF
JOYSTICK
ADD
KEY3
KEY4
KEY2
KEY1
KEY1
M/E2
KEY2
KEY3
KEY4
PLAY
+/-
CLEAR
0
STORE
COPY
STOP
PASTE
OVWR
ENTER
RECALL
.
WIPE
M/E1
BKGD
KEY1
KEY2
WIPE CHANNEL
SELECT / KEYPAD
M/E2
