207
25-6. VDCP Operation
In addition to the commands listed in section 25-4. "Playback and Recording", the switcher can
obtain video information (Clips) from the CLIP List stored in the connected VDCP device and
edit the data. Apart from Clips in the VDCP device, the switcher can store two Playlists, in which
the switcher's own information such as IN and OUT points are contained.
Each Playlist contains the following information.
CLIP ID (ID of the selected Clip stored in the connected device.)
IN point, OUT point and Duration values
The following operations are available:
Operation
Refer to
Creating Playlists
Specifying an IN-point and OUT-point for trimming
Jumping to an IN-point
Jumping to an OUT-point
Jumping to a location specified by time code
Changing CLIP ID (CLIP ID in the connected device is also changed.)
Deleting Clips (They are also deleted from the connected device.)
Copying and clearing Playlists
The switcher can create new Clips (see section 25-6-5).
Note that some VDCP devices may not support all commands available on the switcher.
In such a case, they cannot execute unsupported commands from the switcher.
25-6-1. Creating Playlists
Selecting a Playlist
(1) Display the [SETUP - EXT I/F - VTR/VDCP] menu.
(2) Press the page down button to go to Page 5.
(3) Select 1 (Playlist 1) or 2 (Playlist 2) under
SELECT
.
EXT I/F :SELECT : :FUNC : 5/8
VTR/VDCP:=
1
:>ID SET:>TC SET: >COPY :
Selecting a CLIP ID for the Playlist
(1) Press F2 in Page 5 of the [SETUP - EXT I/F - VTR/VDCP] menu to display the [CLIP]
menu.
EXT I/F :SELECT : :FUNC : 5/8
VTR/VDCP:=1 :>
ID SET
:>TC SET: >COPY :
(2) The [CLIP] menu will display the Clip List stored in the connected device. Turn F1 to
select the CLIP ID of the desired Clip from the list and then press F1.
VTR/VDCP:
CLIP0001
: : 1/1
CLIP :CLIP0002 :>RENAME :>CANCEL :
:CLIP0003 :
:CLIP0004 :
:CLIP0005 :
: | :
Select a CLIP ID from the
CLIP List. (Up to 30 entries
can be displayed.)
