FOR-A HVS-390HS, Operation Manual

Page: 152 / 268

152

Playing Sequences Using the Fader Lever
The playback of sequences can be played back using the fader lever. To do this, follow the
procedure below.
(1) Open PAGE 1 in the [SEQ EDIT] menu.
(2) Set
LINK
to ON.
SEQ EDIT: LOOP : DIR : LINK :TOTAL-D: 1/3
PLAY : =ON : =NOR : =
ON : =100 :
(3) Move the fader lever from end to end to play the sequence one time with the desired play
time.
Note that when the
Fader Link
for a bus is set to M/E1 or M/E2, fader operations cannot be
performed if AUTO or MANU is set for the bus at
TRANS
. In such case, the looping
playback cannot be performed, even if
LOOP
is set to ON,

Playing Sequences with the Fader Lever or the PLAY Button Using the Break
Function
The Break function can automatically pause sequence playback at a desired step. The
setting example below shows how to set the Break function at Step 2 and how to play back
the sequence with the AUTO button using the Break function.
(1) Open PAGE 2 in the [SEQ EDIT] menu.
(2) Select 2 at
STEP
.
(3) Set
BREAK
to ON.
(4) Set
BRK CTL
to EACH.
SEQ EDIT: STEP : DUR : BREAK :BRK CTL: 2/3
STEP : =
2/ 3 : =30 : = ON : = EACH :
BRK CTL setting BREAK setting Description
OFF --- The Break function is disabled at all steps.
EACH
OFF The Break function is disabled at this step
ON The Break function is enabled at this step.
ALL --- The Break function is enabled at all steps.
(5) Open PAGE 1 in the [SEQ EDIT] menu and set
LINK
to M/E1 or M/E2.
SEQ EDIT: LOOP : DIR : LINK :TOTAL-D: 1/3
PLAY : =ON : =NORML: =M/E1 : =60 :
(6) Press +/- (PLAY) to start the sequence playback. The sequence will stop at Step 2. Press
+/- (PLAY) again to restart the sequence. The sequence will be played back from Step 2
to the end. The sequence playback with break points is also performed with the fader
lever in the same way.
First playback Second
playback