226
30-2. HVS-AUX16A/16B/32A/64A
HVS-AUX16A/16B/32A/64A units allow users to remotely change AUX output signals or recall
events of the switcher. A sigle AUX unit can manage all AUX outputs. Up to 16 (32 with SHIFT)
actions can be assigned to buttons on HVS-AUX16A/16B, 32 (64 with SHIFT) on HVS-AUX32A
and 64 on HVS-AUX64A. Up to 10 AUX units can be connected to the switcher.
A LAN cable is required for the AUX unit connection.
30-2-1. Connecting AUX Units
AUX units should be connected to the switcher through LAN cables.
To connect an AUX unit directly to the switcher, use a
cross-over
cable.
To connect an AUX unit via a network hub, use a
straight-through
cable.
AUX ID Number
AUX ID numbers from 1 to 255 are used to uniquely identify an AUX unit.
To connect to the HVS-390HS unit, use
ID1 to ID10
. (Default setting: ID1)
The ID numbers should not be duplicated when connecting to a switcher.
See the "HVS-AUX16A/16B/32A/64A Operation Manual" for more details.
Checking AUX Unit MAC Addresses
AUX unit MAC addresses can be checked from the switcher.
The following example shows how to check the connected HVS-AUX16A MAC address.
(1)Open [SETUP - EXT I/F - AUX UNIT] menu PAGE 1.
(2) Select
UNIT1
[xxBTN] under
SELECT
.
(3) Open [SETUP - EXT I/F - AUX UNIT] menu PAGE 5.
The unit's MAC address is displayed as shown below.
AUX UNIT: MAC ADDRESS : 5/5
MAC ADDR: 00-00-00-00-00-00 :
LAN
HVS-AUX16A rear panel
EDITOR
OPTION SLOT
AC100-240V 50/60Hz IN
2
RS-422
AUX
HDMI
GPI IN
SDI OUTPUT
1
2
A
B
1
2
1
2
3
4
5
6
7
8
SDI INPUT
9
10
11
12
13
14
16
15
GPI/TALLY OUT
OPTION SLOT
C
D
1
AC100-240V 50/60Hz IN
RATING LABEL
TO OU
GENLOCK
REF IN
REF OUT
LAN
1
2
3
4
5
6
3
4
5
6
HVS-390HS rear panel
Cross-over cable
