FOR-A HVS-390HS, Operation Manual

Page: 142 / 268

142
16-2-2. Using the RECALL Button

To Recall Events (fastest method):
(1) Press EVENT in the MEMORY block.
(2) Press the number button where the needed data
is to be stored.
(3) Press RECALL.
The selected event will then be applied to the panel.

To Recall Events (detailed):
(1) Press EVENT in the MEMORY block.
The [EVENT MEMORY] menu is displayed and
the Keypad changed to Event mode.
(2) Turn F1 to select an event page in the [EVENT
MEMORY] menu.
(3) Press the number button where the needed data
is to be stored. The [EVENT RECALL] menu is
displayed and the saved data in the event is set
on the [EVENT RECALL] menu.
EVENT :SELECT :XPT :DATA : RATE : 1/3
RECALL : =
ALL : = ON : = ON : =OFF :P.00
(4) This time users can select to recall all saved data or specific data within the event by
setting
SELECT
,
XPT
and
DATA
items on PAGE 1. (PAGE 2 has the same items for data
selection as those on PAGE 2 of the [EVENT STORE] menu. See section 16-1. "Storing
Events" for details.)
For example, to recall stored event data except the M/E2 background information, one
must do the following:
EVENT :SELECT :XPT :DATA : RATE : 1/3
RECALL : =
ALL : = OFF : = OFF : =OFF :P.00
(5) Press RECALL. The [EVENT RECALL] menu is displayed.
The number of the last recalled event is displayed at bottom right in the [EVENT MEMORY]
menu. This is useful when checking which event was recalled last.
Page No.
‚b‚t‚s ‚c‚d‚k ‚`‚c‚c
SEQUENCE EVENT WIPE
MENU USER BUTTON
MEMORY
CONTROL
MACRO
SEQ EDOT COPY/SWAP
7 8 9
4 5 6
1 2 3
ATTATCH
INC
COPY SWAP
STILL
NEW
FILE MATT SETUP
M/E1
DETTACH
DEC
ADD
KEY3 KEY4 KEY2 KEY1
KEY1
M/E2
KEY2 KEY3 KEY4
PLAY
+/-
CLEAR
0
STORE
COPY STOP PASTE OVWR
ENTER
RECALL
.
WIPE
SELECT / KEYPAD