177
20-2. Clip Adjustment
Signal level thresholds for all color correction outputs (Clip adjustment) can be adjusted in Y/C
or RGB mode. If Clip adjustment is disabled (ENABLE to OFF), default values are applied to
output signals.
<To Set Clip in Y/C Mode:>
(1) Open [SETUP - INPUT - CC] menu PAGE 5.
(2) Turn F4 to set
ENABLE
to Y/C.
(3) Turn F1 to F3 to set each parameter limit respectively.
INPUT : Y/C CLIP :ENABLE : 5/6
CC CLIP :YW=
109%
:YB=-
7%
:C=
111%
: =ON :
Parameter
Description
Default
Setting
YW
Sets the WHITE limit in Y signal.
(See below in this page.)
109%
50% to 109%
YB
Sets the BLACK limit in Y signal.
(See the next page.)
-7%
-7% to 50%
C
Sets the WHITE limit in C signal.
111%
50% to 111%
<To Set Clip in RGB Mode:>
(1) Open [SETUP - INPUT - CC] menu PAGE 5.
(2) Turn F4 to set
ENABLE
to RGB.
(3) Turn F1 to F3 to set each R, G and B limit for WHITE in PAGE 5 and for BLACK in PAGE 6.
INPUT : RGB WHITE CLIP :ENABLE : 5/6
CC CLIP :R=300% :G=300% :B=300% : =
RGB
:
INPUT : RGB BLACK CLIP :ENABLE : 6/6
CC CLIP :R=-200%:G=-200%:B=-200%: =
RGB
:
Page
Parameter
Description
Default
Setting
Page 1
WHITE
R / G / B
Sets the WHITE limit using R, G and B.
(See below.)
300%
50% to 300%
Page 2
BLACK
R / G / B
Sets the WHITE limit using R, G and B.
(See the next page.)
-200%
-200% to 50 %
Y/C Mode and RGB Mode
Y/C mode
Y White Clip
Adjustable Range 50 to 109%
Default setting: 109%
100% color bars when 100% white
109%
100%
50%
50%
0%
Y White Clip level range
