45
5-2. How to Assign Sources to Bus Buttons
Primary and optional video inputs, internally generated signals (black, mattes, etc.), captured
stills and macros can be freely assigned to any M/E1, M/E2 or KEY/AUX bus buttons using the
procedure below. Signal-to-Button mappings are shared among M/E1, M/E2 and KEY/AUX
buses.
(1) Press MENU, then SETUP to display the SETUP menu top page.
(2) Turn F1 to select INPUT. Press F1 or the page down button to display the [SETUP - INPUT]
menu.
(3) Turn F1 to select ASSIGN. Press F1 or the page down button to display the [SETUP - INPUT
- ASSIGN] (1/6) menu.
INPUT :BUTTON : SIGNAL NAME :INHIBIT: 1/6
OU ASSGN: =01 : =IN04 : =IN04 : =OFF :
(4) Turn F1 to select a bus button under
BUTTON
.
(5) Turn F2 to select the signal to be assigned under
SIGNAL
. Users can also select a signal by
turning F3 under
NAME
.
SIGNAL
and
NAME
are linked to each other. (See section 5-1.
"How to Assign User Names to Source" for more details.)
Submenu
Parameter
Default
Setting range
OU ASSIGN
BUTTON
1
1-28, sft1-sft28 (shifted buttons) (*1)
SIGNAL NAME
IN01
(See the table below)
INHIBIT
OFF
OFF, M/E1, M/E2, BOTH
BUTTON
SIGNAL setting
Description
01 to 28,
sft01 to sft28
(shifted
buttons)
(*1)
NONE
No signal assignment
BLACK Black
signal
IN01 to IN16
Video input to rear connectors 1-16
STIL1 to 4
Still pictures 1 to 4
STILK1 to 4
Stillkeys 1 to 4
MATT1, MATT2
BUS MATT Color 1 and 2
CLBAR
Internally generated color bar signal
M/E
M/E1 program re-entry (M/E2 bus only)
MCR00-39
Macro00 to 39 (See section 18-6-1.)
SHIFT
Shift button function
INA1-INA4
Optional video input to slot A (*1) (See section 2-3.)
INB1-INB4
Optional video input to slot B (*1) (See section 2-3.)
(*1) The number of buttons varies depending on the OU type.
Inputs vary depending on the type and number of installed input expansion card/s.
To Disable Bus Button Operation
Users can inhibit operation of specific bus buttons. First, select an M/E or BOTH under
INHIBIT
on PAGE 1, the selected bus button on the M/E is set to INHIBIT. Next, set
INHIBIT
to ENABLE
on PAGE 2 to enable the bus button inhibit function. All bus buttons, which are set to INHIBIT,
cannot select signals. The INHIBIT setting has no effect on the KEY/AUX bus.
Even if a bus
button cannot be used on M/E, it can be used for the key source, key insert or AUX output.
INPUT :BUTTON : SIGNAL NAME :INHIBIT: 1/6
OU ASSGN: =01 : =IN04 : =IN04 : =
BOTH
:
INPUT : M/E CONTROL : :INHIBIT: 2/6
OU ASSGN:ME1=ON :ME2=ON : : =
ENABL
:
