FOR-A HVS-390HS, Operation Manual

Page: 141 / 268

141
EVENT :AUX SEL:AUX RCL:KEY ASG:SEQ RCL: 2/3
STORE : =AUX1 : =OFF : =OFF : =OFF :P.00
EVENT :CG WIPE: : 3/3
STORE : =OFF : :P.00
IMPORTANT
User Default Settings for the [EVENT STORE] menu
The same items (RATE, KEY ASG and DEQ RCL) in the [EVENT MEMORY] menu
and [EVENT STORE] menu link together. When one is changed in the [EVENT
MEMORY] menu, it is also changed in the [EVENT STORE] menu and becomes the
default setting in the [EVENT STORE] menu, but not vice versa.
16-2. Recalling Events
16-2-1. DIRECT Mode
Events can most quickly be recalled in Direct Operation mode. However, users cannot select
the loaded data at recalling events. To use Direct Operation mode, set
DIRECT
to ON in the
menu before recalling events.
(1) Press EVENT in the MEMORY block.
(2) Turn F1 to select an event page in the [EVENT MEMORY] menu.
EVENT : PAGE :DIRECT :PAGECLR:RATE : 1/3
MEMORY : =
0 : =OFF : >CRNT : =OFF : L=0
(3) Press the number button where the
needed data is to be stored. The selected
event will be applied to the panel.
* Users can select the data to be recalled from
PAGE 2 in the [EVENT MEMORY] menu.
See the previous page.
The number of the currently opened event page
is displayed at bottom right in the [EVENT
RECALL] menu.

To Set DIRECT to ON:
When pressing EVENT in the MEMORY block,
the [EVENT MEMORY] menu is automatically
displayed.
Turn F2 to set
DIRECT
to ON.
EVENT : PAGE :DIRECT :PAGECLR: RATE : 1/3
MEMORY : =0 : =
ON : >CRNT : =OFF : L=0
Last Recall No.
‚b‚t‚s ‚c‚d‚k ‚`‚c‚c
SEQUENCE EVENT WIPE
MENU USER BUTTON
MEMORY
CONTROL
MACRO
SEQ EDOT COPY/SWAP
7 8 9
4 5 6
1 2 3
ATTATCH
INC
COPY SWAP
STILL
NEW
FILE MATT SETUP
M/E1
DETTACH
DEC
ADD
KEY3 KEY4 KEY2 KEY1
KEY1
M/E2
KEY2 KEY3 KEY4
PLAY
+/-
CLEAR
0
STORE
COPY STOP PASTE OVWR
ENTER
RECALL
.
WIPE
SELECT / KEYPAD