171
Image files can be uploaded to the following memory buffers in the switcher:
Upload destination
(LOAD setting using F2)
Description
STILL1 to STILL4
Uploads an image file to a still memory buffer.
STIL1C to STIL4C
Uploads an image file to a still memory buffer as a centered
format.
STIL1T to STIL4T
Uploads an image file to a still memory buffer as a tiled
format.
FMEM1 to FMEM4
Uploads image files to a clip memory buffer.
IN01 to IN16
(INPUT STILL)
Uploads an image file to an input frame memory (a frame
buffer ordinary used by the Frame Synchronizer) Once an
image is stored to an input buffer, instead of input video, the
uploaded still image will continued to be displayed from this
input.
To display the input video again on the input bus, perform
CLEAR in the [INPUT STILL] menu. (See section 5-5.
"INPUT STILL (Freezing Input Video).")
19-5. Moving between USB Flash Memory Directories
The directories in USB flash memory are displayed after "<DIR>", e.g. <DIR>JPEG, toward the
upper right of the FILE menu as shown below.
FILE : EXT : LOAD : <DIR>JPEG : 1/2
LOAD : =JPG : =STIL1: sample: 101MB
In all FILE menus you can move to other directories in the USB flash memory in the following
way.
(1) In the [FILE - SAVE] menu, turn F2 to select PATH in the FILE menu, and then press F2. The
menu display changes to the directory menu.
(2) If you want to go to a subdirectory of the current directory, turn F3 to select the directory
name and press F3. If you want to go to a higher directory, select <DIR>...
NOTE
New directories cannot be prepared in the switcher. If you need a new directory,
prepare it in the computer previously.
Directory name
File name
