47
5-4. Resize Function
A resize function allows users to input
SD signals
at the same frame-rate
as that in HD mode
,
and use them as
HD images by upsizing
.
The Resize function is available for the following inputs:
IN13
to
IN16
4
inputs
HVS-30HSDI (extension card)
All 4 inputs
To use this function, proceed as follows.
(1) Display the [SETUP - INPUT] menu.
(2) Turn F1 to select SIGNAL. Press F1 or the page down button to display the [SETUP - INPUT
- SIGNAL] menu.
SETUP :>
SIGNAL
>PROC AMP>RENAME >ASSIGN
INPUT :>CC >COLORBAR
(3) Turn F1 to select an input signal for resizing.
(4) Turn F2 to set AUTO or SD-SDI for
FORMAT
.
(5) Turn F3 to select an aspect ratio under
RESIZE
.
INPUT :SELECT :FORMAT :RESIZE : FS : 1/4
SIGNAL : =IN13 : =
SD-SDI
: =4:3 : =ON :
IMPORTANT
The Resize function is automatically enabled when SD signals are input to the
switcher in HD mode, and FORMAT in the [SETUP - INPUT - SIGNAL] menu is set to
SD-SDI. (Ensure the Resize function stays disabled if HD-SDI is set for FORMAT.)
IN01 (HD)
(1080/59.94i)
FORMAT (AUTO)
RESIZE (OFF)
IN04 (SD)
(525/59.94i)
FORMAT (SD-SDI)
RESIZE (4:3)
IN04 (SD)
(525/59.94i)
FORMAT (SD-SDI)
RESIZE (SQUEEZE)
IN04 (SD)
(525/59.94i)
FORMAT (SD-SDI)
RESIZE (LETTER)
