192
<Ex. 3>
To execute the Ex. 3 procedure using USER Button 3, set the menu as shown below.
(1) Set items on PAGE 1 of the [USER BUTTON] menu as shown below.
USER :SELECT : TYPE : FUNC(F3) : 1/2
BUTTON : =
OU-3
: =
VTR
: =
VTR1 PLAY
(2) Set items on PAGE 2 as shown below.
USER :SELECT :TRG EDG: FUNCTION(F3) : 2/2
BUTTON : =OU-3 : =
ON
: =
Out:ME1 KEY1 ON TLY
About TRG EDG (TRIGGER EDGE)
Setting
Description
ON (Default)
User button function is activated when the state of the specified item
changes to ON.
OFF
User button function is activated when the state of the specified item
changes to OFF.
DBL
User button function is activated when the state of the specified item
changes to ON or OFF.
About FUNCTION
The FUNCTION item specifies an item as a trigger. Items available for tallies or GPI IN can
be set. See tables in section 24-1-2. "GPI OUT" and section 24-2. "Tally Output" for details.
NOTE
The following User Button functions cannot be activated by triggers.
-Record on VTR or VDCP (if DIRECT REC mode is off.)
-Record to Clip Memory (if REC MODE is STANDARD.)
The Trigger User Button function can be used only on an Operation Unit whose OU
NO is set to OU1 in the ARCNET menu. See section 3-3. "How to Connect between
MU and OU Units" and section 32-1 "Arcnet" for details on OU NO settings.
