Fluke Biomedical medTester 5000C Operators, Operator'S Manual

Page: 92 / 292

medTester 5000C
Operators Manual
5-22
4. CYCLE TEST TIME IN MINUTES—Enter the time between
measurements (1-9 minutes).
5.
TRIGGER LEVEL—Enter the trigger threshold, that is the
percent of deviation in relative humidity that causes an automatic
measurement (1-9 percent).
Measurements of the relative humidity begin and display on the top line. Line
two of the display indicates the measurement interval and the trigger point
percentage.
Ctrl+P triggers the readings. To terminate readings, press:
DONE
F5
End-of-Test Prompts
At the end of the autosequence, medTester prompts you for the following
data: (prompts can be turned off)
•
COMMENTS
•
NEXT TEST DUE DATE
•
USER TIME
•
FINISHED—STORE RECORD?
(appears if memory was selected)