Fluke Biomedical medTester 5000C Operators, Operator'S Manual

Page: 176 / 292

medTester 5000C
Operators Manual
11-12
Posttest Prompts
Posttest prompts that have been switched on appear upon completion of the
checklist. After responding to any posttest prompts, the medTester asks you
to store or print the test record.
Checklist Records
The number of checklist records that the medTester 5000C creates is
dependent upon the structure of the checklist. One record is stored for the
checklist itself. Individual records for autosequences executed as part of the
checklist are generated separately. The checklist record itself is generated last.
After you execute checklists that you have loaded into the medTester, you can
upload the data recorded in memory to your EMS or CMMS. In addition, you
can view or print records using the memory functions.
If elapsed test time is turned on, time is recorded for the entire checklist. If any
autosequences are executed as part of the checklist, autosequence elapsed
times are displayed as:
XXX .
View or Print a Checklist
You can view or print a checklist ( not the test record) from the checklist
menu using the same procedure described above for finding and running a
checklist. Once you select a checklist medTester displays:
Press either VIEW or PRINT .
To view the selected checklist, choose VIEW from the CHECK menu. The
example below displays how one checkitem appears when you view it:
What you see is the number of the first ITEM in the checklist with its sequence
number. Also the TYPE of checkitem appears. TYPE means the control type
placed on the checkitem within the EMS or CMMS when you write the
checklist.
CHECKLIST: 000001
PRINT
F5
VIEW
F4
RUN
F3
ITEM: X TYPE: PASS/FAIL/DATA
LIGHTS & INDICATORS…CHECK OPERATION