Fluke Biomedical medTester 5000C Operators, Operator'S Manual

Page: 254 / 292

medTester 5000C
Operators Manual
15-26
MORE
F4
to select more steps, or
END
F5
to end your selections.
6.
STARTING ALARM VALUES: Enter starting values for the alarm
tests for:
•
SPO2
•
HEART RATE
•
AMPLITUDE (For the Index 2XL, enter amplitude from 0% to
20% with the thirty-three selections offered)
Note
Even if you do not intend to perform any alarm tests, you still
have to go through the starting alarm values. You can just press
ENT to get through them.
7.
Answer
F4 YES
or
F5 NO
whether to perform the following special tests:
•
SPO2 ALARM TEST: If YES, then enter the Hi and Lo alarm
values.
•
RATE ALARM TEST: If YES, then enter the Hi and Lo alarm
values.
•
ASYSTOLE TEST
•
AMPLITUDE TEST
•
MOTION TEST (Index 2XL only) – Select the motion test desired.
•
PROBE TEST
After customizing your autosequence, the medTester prompts you to store
the autosequence:
STORE
F5