Fluke Biomedical medTester 5000C Operators, Operator'S Manual

Page: 288 / 292

medTester 5000C
Operators Manual
17-14
After customizing your autosequence, the medTester prompts you to store
the autosequence:
STORE
F5
Print Your Autosequence
From the NIBP custom autosequences menu described above, printing any
autosequence is accomplished through this menu command:
PRINT
F3
Reinitialize Factory Default Settings
Any customized autosequences can be returned to the factory default settings.
To do this, enter these medTester commands:
1.
From the medTester 5000C main menu, MENU 1, press the
right arrow to access MENU2 .
2.
Enter the command:
CUSTOM
F3
3.
From the custom menu, press the right arrow and enter the
command:
INIT
F3
4.
Press the right arrow, and then press:
NIBP
F2
5.
To initialize NIBP autosequences to defaults, press:
YES
F5