100/180MM DISTRIBUTED GRAPHIC RECORDER: USER GUIDE
Page 222
HA029324
Issue 11 Oct 14
4.7.9 Recording category
The following ‘Recording jobs’ are available:
Enable
This enables recording to the group’s history fi le, ‘while active’, ‘while inactive’ or ‘while
unacknowledged’. This allows, for example, recording to be enabled (job 2) only whilst
a Trend Freeze job (job 1) is inactive (i.e recording is disabled for the duration of a Trend
Freeze job). Trend freeze is described in section 4.7.10, below.
Speed/Interval B Recording speed/interval B is selected for use, for the duration of the job. See ‘Group
confi guration for A/B switching details.
Erase all History All recorder history is erased (only if Simulation option -
section 4.3.22
- is enabled), but
see also note four.
Notes:
1 The group in question will be recorded only if Recording Enable selected in group Confi gura-
tion (
section 4.3.2
) and the job is active.
2. If Audit Trail (
section 4.4.2
) is enabled, then in order to preserve the audit trail, messages will be
saved in the group’s history fi les even when recording is not enabled by job.
3. A blue line is drawn across the ‘chart’ whenever a recording job is used to disable/enable recording.
4. If the 21CFR11 option is enabled, ‘Erase All History’ jobs can be triggered, but are ignored,
leaving the recording history unaffected.
Figure 4.7.9 Recording job menu layout
Job Number
Recording
Category
Group
While
1) Group 1
1
Recording
Enable
Active
Select required action
Select required Group if appropriate
Select 'Active', 'Inactive' or 'Unacknowledged'
Summary of Contents for 6100
Page 2: ......
Page 4: ...EUROT H ERM ...
Page 377: ...100 180 MM DISTRIBUTED GRAPHIC RECORDER USER GUIDE This page is de ...
Page 396: ......