Eurotherm 6100, User Manual

Page: 320 / 397

100/180MM DISTRIBUTED GRAPHIC RECORDER: USER GUIDE
HA029324
Issue 11 Oct 14 User Guide
Page 304
8.4.7 IEEE 32-bit channel con fi guration data
The following tables show the hexadecimal addresses for the speci fi ed 32-
bit fl oating-point values, for channels 1 to 12.
Generally, Parameter address for channel N = Parameter address for channel 1 + 36(N-1) (decimal). The word
channel is used as an umbrella term for input channels, maths channels, totalisers etc.
CHANNEL 1
Note: A/B Switching:
B values are not accessible via modbus
for this software version. Span, Zone,
Colour etc. are therefore all setting A
Notes
1. For
maths , totalisers and counters , see the relevant option description.
2. If an alarm’s Setpoint Source ( section 4.3.3 ) is set to anything other than ‘Constant’ the value re-
turned will be the previously con fi gured constant value.
Parameter name Description Type Access
Start Addr
Hex (Dec)
Register
Length
Parameter name Description Type Access
Start Addr
Hex (Dec)
Register
Length
Parameter name Description Type Access
Start Addr
Hex (Dec)
Register
Length
Ch1 span high Upper span value (Display full scale) Float Read only D4E7 (54503) 2
Ch1 span low Lower span value (display ‘zero’) Float Read only D4E9 (54505) 2
Ch1 Zone high Zone upper value (% of ‘chart’ width) Float Read only D4EB (54507) 2
Ch1 Zone low Zone lower value (% of ‘chart’ width) Float Read only D4ED (54509) 2
Ch1 Alarm 1 setpoint Trigger setpoint (Note 2) for alarm 1 (Note 2) Float Read/Write D4EF (54511) 2
Ch1 Alarm 2 setpoint Trigger setpoint (Note 2) for alarm 2 (Note 2) Float Read/Write D4F1 (54513) 2
Ch1 Alarm 3 setpoint Trigger setpoint (Note 2) for alarm 3 (Note 2) Float Read/Write D4F3 (54515) 2
Ch1 Alarm 4 setpoint Trigger setpoint (Note 2) for alarm 4 (Note 2) Float Read/Write D4F5 (54517) 2
Spare D4F7 (54519) 20
CHANNEL 2
Ch2 span high Upper span value (display full scale) Float Read only D50B (54539) 2
Ch2 span low Lower span value (display ‘zero’) Float Read only D50D (54541) 2
Ch2 Zone high Zone upper value (% of ‘chart’ width) Float Read only D50F (54543) 2
Ch2 Zone low Zone lower value (% of ‘chart’ width) Float Read only D511 (54545) 2
Ch2 Alarm 1 setpoint Trigger setpoint for alarm 1 (Note 2) Float Read/Write D513 (54547) 2
Ch2 Alarm 2 setpoint Trigger setpoint for alarm 2 (Note 2) Float Read/Write D515 (54549) 2
Ch2 Alarm 3 setpoint Trigger setpoint for alarm 3 (Note 2) Float Read/Write D517 (54551) 2
Ch2 Alarm 4 setpoint Trigger setpoint for alarm 4 (Note 2) Float Read/Write D519 (54553) 2
Spare D51B (54555) 20
CHANNEL 3
Ch3 span high Upper span value (display full scale) Float Read only D52F (54575) 2
Ch3 span low Lower span value (display ‘zero’) Float Read only D531 (54577) 2
Ch3 Zone high Zone upper value (% of ‘chart’ width) Float Read only D533 (54579) 2
Ch3 Zone low Zone lower value (% of ‘chart’ width) Float Read only D535 (54581) 2
Ch3 Alarm 1 setpoint Trigger setpoint for alarm 1 (Note 2) Float Read/Write D537 (54583) 2
Ch3 Alarm 2 setpoint Trigger setpoint for alarm 2 (Note 2) Float Read/Write D539 (54585) 2
Ch3 Alarm 3 setpoint Trigger setpoint for alarm 3 (Note 2) Float Read/Write D53B (54587) 2
Ch3 Alarm 4 setpoint Trigger setpoint for alarm 4 (Note 2) Float Read/Write D53D (54589) 2
Spare D53F (54591) 20