Eurotherm 6100, User Manual

Page: 234 / 397

100/180MM DISTRIBUTED GRAPHIC RECORDER: USER GUIDE
Page 218 HA029324
Issue 11 Oct 14
4.7 JOBS
A number of sources (e.g. channel, event, totaliser) can be set up to trigger one or more jobs. The follow-
ing description includes all possible job categories, but which jobs are available on any particular record-
er depends on the options fi tted to that recorder. Many job categories require the relevant access level
permission to be set, as described in
section 4.4.1 , above.
The type of action (continuous or ‘single-shot’), available for selection, depends on the type of trigger
source. Continuous actions are selected from: While active, While inactive or While unacknowledged.
The available single-shot actions are: On becoming active, On becoming inactive, On acknowledgement.
4.7.1 No Action
This means that no job action is confi gured for the trigger source.
4.7.2 Totaliser category
If the Totaliser option is fi tted ( section 4.3.12 ), the following jobs become available:
Preset Loads the selected totaliser with the value set up in ‘Preset’ in the totaliser’s confi gura-
tion menu.
Preset Group Loads all the totalisers in the specifi ed group with their ‘Preset’ values.
Disable Stops the specifi ed totaliser accumulating.
Disable Group Stops all totalisers in the specifi ed group.
Note: If more than one job is set up to disable a particular totaliser, then any of these jobs going
active will disable the totaliser.
Figure 4.7.2 Totaliser job menu layout (group action)
Job Number
Action
Category
Group
On
1) Group 1
1
Totaliser
Preset Group
Acknowledgement
Select 'Preset', 'Disable',
'Preset Group' or 'Disable Group'
Select Required Group
Select 'Active', 'Inactive'
or 'Acknowledgement'