Eurotherm 6100, User Manual

Page: 67 / 397

100/180MM DISTRIBUTED GRAPHIC RECORDER: USER GUIDE
HA029324
Issue 11 Oct 14 Page 51
4.2.6 Export screen
This fi eld appears only if the Screen Builder option ( section 7 ) is fi tted, and allows a User Screen to be
exported to a removable memory device or to the internal Flash memory. The exported screen can sub-
sequently be imported either into this recorder or into a different recorder.
4.2.7 Import User Linearisation
Note: User linearisation tables can be imported into all versions of the recorder, but not every ver-
sion has a ‘Lin Type’ fi eld in
Channel confi guration allowing such tables to be selected for use.
User Linearisation
File Name
Import
1) UserLin1
userlin
The Import Linearisation feature allows linearisation tables to be imported either from the Compact Flash
card, USB device or if Bridge ‘Full’ software is fi tted, directly from the host PC.
Touching the User Linearisation fi eld allows the user to select which of ‘UserLin1’ to ‘UserLin12’ is to con-
tain the imported fi le.
Touching the File Name fi eld, calls a popup menu similar to that shown in fi gure 4.2b. This allows the user
to select the table to be imported.
The fi le must be comma separated ASCII as follows:
n,
X1,Y1
X2.Y2
X3,Y3
.
.
Xn,Yn
where ‘n’ is the total number of XY pairs in the table, and or each pair, X is the input value, and Y is the
linearised value corresponding to X. See
section 4.3.9 for full details.
Note: Imported linearisation tables will not become effective until after the next confi guration
‘Apply’ operation.
4.2.8 Export User Linearisation
Similar to ‘Import user Linearisation’, above, the Export Linearisation feature allows linearisation tables
created in the recorder to be exported either via the Compact Flash card or if Bridge ‘Full’ software is fi t-
ted, directly to the host PC. See
section 4.3.9 for full details.
4.2.9 Import printer driver
Not used for this recorder model.