100/180MM DISTRIBUTED GRAPHIC RECORDER: USER GUIDE
Page 224
HA029324
Issue 11 Oct 14
4.7.11 Output category
Applies only to recorders with Modbus master option fi tted. As described in
section 4.3.16
, when Mod-
bus Master is enabled, a number of ‘Output channels’ become available for confi guration. This feature
allows any specifi ed recorder point to be copied to a destination instrument’s input channel, if this is set
to Input Type = Slave comms.
An output job allows a specifi c output channel write to be disabled when the recorder is acting as a mod-
bus master.
Job Number
Action
Category
Output
On
1
Output
Disable Write
Active
1) Output 1
Select 'Active', 'Inactive' or 'Acknowledgement'
Select required output
Job Number
Action
Category
Acyclic
On
1
Demand writes
Write
Active
1) Write 1
Select Required Write number
Select 'Active', 'Inactive' or 'Acknowledgement'
Figure 4.7.11 Output Job menu layout
4.7.12 Demand Writes category
Applies only to recorders with Modbus master option fi tted.
Demand Writes jobs allow the user to set up the recorder so that, when the job is triggered, it initiates the
selected Demand Write. The write action is performed to the remote device as defi ned in Demand Write
Confi guration described in
section 4.3.18
.
Figure 4.7.12 Demand write jobs menu layout
Summary of Contents for 6100
Page 2: ......
Page 4: ...EUROT H ERM ...
Page 377: ...100 180 MM DISTRIBUTED GRAPHIC RECORDER USER GUIDE This page is de ...
Page 396: ......