Eurotherm 6100 User Manual Download

Page: 255 / 397

100/180MM DISTRIBUTED GRAPHIC RECORDER: USER GUIDE

HA029324

Issue 11 Oct 14

User Guide
Page 239

7 SCREEN BUILDER

7.1 INTRODUCTION

This option allows the user to create screen layouts using recorder data, simple drawing tools, text and/or

imported image

les.

24 user screens are editable directly from the operator interface. A further 100 extra screens (25 to 124)

which can be created/edited etc. only via Bridge software are also available. Once created, such screens can

be copied or moved to one or more of screens 1 to 24, thus becoming accessible at the instrument’s operator

interface.

Each enabled user screen appears as a selection key in the ‘Goto View’ menu. It is therefore recommended

that the number of ‘Bridge Screens’ is set to the number actually needed, in order to reduce the number of

‘More...’ operations.

Notes:
1. User screens are not supported from a PDA.

2. As a result of the way in which the screen is refreshed, unexpected results may be obtained if any

component is superimposed upon an active component, such as a bargraph or trend display.

3. The hash (#) character may not be used in text strings.

Summary of Contents for 6100














































































































































































































































































































































































































Search results

Summary of Contents for 6100

Reviews:

Related manuals for 6100

Brands by name

Popular brands

Eurotherm 6100, User Manual

Search results

Summary of Contents for 6100

Reviews:

Related manuals for 6100

Brands by name

Popular brands