Eurotherm 6100, User Manual

Page: 340 / 397

100/180MM DISTRIBUTED GRAPHIC RECORDER: USER GUIDE
HA029324
Issue 11 Oct 14 User Guide
Page 324
When used with a programmable receiver which is con fi gured to generate GPS messages typically every 10
minutes, the ‘Timeout’ parameter can be set to 0 to disable it, so as to record required messages every 10 min-
utes.
‘Timeout’ can be set to different rates for each fi lter in which case the data will be recorded at the rates set
for each fi lter.
When the instrument reboots the fi lter timeouts will reset, so the fi rst message received will be recorded (in a
new history fi le), the timeouts will then come into effect.
Filter timeouts will also be reset when the instrument is recon fi gured or the clock is changed as per existing
“ASCII input” parameters.