Euro Video EVD-16/400A1DH Series User Manual Download

Page: 186 / 196

User Manual of EVD-16/400A1DH Series DVR

185

13.1 Configuring RS-232 Serial Port

Purpose:

The RS-232 port can be used in two ways:

•

Parameters Configuration: Connect a PC to the DVR through the PC serial port. Device parameters can be

configured by using software such as HyperTerminal. The serial port parameters must be the same as the DVR‟s

when connecting with the PC serial port.

•

Transparent Channel:

Connect a serial device directly to the DVR. The serial device will be controlled remotely

by the PC through the network and the protocol of the serial device.

Steps:

Enter the RS-232 Settings interface.

Menu > Configuration > RS-232

Figure 13.1 RS-232 Settings Interface

Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control and usage.

Click the

Apply

button to save the settings.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands