Euro Video EVD-16/400A1DH Series User Manual Download

Page: 58 / 196

User Manual of EVD-16/400A1DH Series DVR

Figure 5.16 Edit Schedule- All Day

To arrange other schedule, leave the

All Day

checkbox blank and set the Start/End time.

Note:

Up to 8 periods can be configured for each day. And the time periods can‟t be overlapped each

other.

Repeat the above steps11)-13) to schedule motion detection triggered recording/capture for all the

week. If the schedule can also be set to other days, click

Copy

Figure 5.17 Copy Schedule to Other Days

Click

to back to upper level menu.

You can repeat steps to set schedule for other channels, if the settings can also be used to other channels, click

Copy

, and then choose the channel to which you want to copy.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands