Euro Video EVD-16/400A1DH Series User Manual Download

Page: 130 / 196

User Manual of EVD-16/400A1DH Series DVR

129

8.5 Handling Exceptions

Purpose:

Exception settings refer to the handling method of various exceptions, e.g.

• HDD Full:

The HDD is full.

• HDD Error:

Writing HDD error or unformatted HDD.

• Network Disconnected:

Disconnected network cable.

• IP Conflicted:

Duplicated IP address.

• Illegal Login:

Incorrect user ID or password.

• Abnormal Video Signal:

Unstable video signal.

• Input / Output Video Standard Mismatch:

I/O video standards do not match.

• Abnormal Record/Capture:

No space for saving recorded files or captured images.

Steps:

Enter Exception interface of System Configuration and handle various exceptions.

Menu> Configuration> Exceptions

Please refer to

Chapter 8.6

for detailed alarm response actions.

Figure 8.19 Exceptions Setup Interface

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands