Euro Video EVD-16/400A1DH Series User Manual Download

Page: 141 / 196

User Manual of EVD-16/400A1DH Series DVR

140

•

NTP Port:

Port of NTP server.

Click the

Apply

button to save and exit the interface.

Note:

The time synchronization interval can be set from 1 to 10080min, and the default value is 60min. If the DVR

is connected to a public network, you should use a NTP server that has a time synchronization function, such as the

server at the National Time Center (IP Address: 210.72.145.44). If the DVR is setup in a more customized network,

NTP software can be used to establish a NTP server used for time synchronization.

9.2.4 Configuring FTP Server

Purpose:

The FTP can be configured on your DVR to realize dual-directional transmission of control files over Internet. And

the captured pictures of DVR can be uploaded to FTP server as well.

Steps:

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

FTP

tab to enter the FTP Settings interface, as shown in Figure 9.10.

Figure 9.9 FTP Settings Interface

Check the

Enable

NTP

checkbox to enable this feature.

Configure the FTP settings, including FTP server, port, user name, password and the directory.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands