Euro Video EVD-16/400A1DH Series User Manual Download

Page: 82 / 196

User Manual of EVD-16/400A1DH Series DVR

If more than one channel is optional, pressing

button takes you to step 3 and step 4.

Figure 6.10 Result of Normal Video Search

Choose channels for simultaneous playback.

Note:

Optional channels for simultaneous playback are the same as the channels chosen to search record

files in step 1. And the channel with the recorded file selected in step 2 is the main channel during

multi-channel playback and it is displayed at the upper left corner.

Figure 6.11 Select Channels for Synchronous Playback

Synchronous Playback interface.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands