Euro Video EVD-16/400A1DH Series User Manual Download Page 156

Page: 156 / 196

User Manual of EVD-16/400A1DH Series DVR

155

Enter the NetHDD IP address in the text field.

Enter the NetHDD Directory in the text field.

Click the

button to add the configured NAS disk.

Note:

Up to 8 NAS disks can be added.

Figure 10.7 Add NAS Disk

•

Add IP SAN:

Enter the NetHDD IP address in the text field.

Click the

Search

button to the available IP SAN disks.

Select the IP SAN disk from the list shown below.

Click the

button to add the selected IP SAN disk.

Note:

Up to 1 IP SAN

disk can be added.

Figure 10. 8 Add IP SAN Disk

After having successfully added the NAS or IP SAN disk, return to the HDD Information menu. The

added NetHDD will be displayed in the list.

Note:

If the added NetHDD is uninitialized, please select it and click the

Init

button for initialization.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands