Euro Video EVD-16/400A1DH Series User Manual Download Page 31

Page: 31 / 196

User Manual of EVD-16/400A1DH Series DVR

3.2 Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.

•

Single Screen: show only one screen on the monitor.

•

Multi-screen: show multiple screens on the monitor simultaneously.

•

Auto-switch: the screen will be auto switched to the next one. And you must set the dwell time for each

screen on the configuration menu before enabling the auto-switch. Menu>Configuration>Live View>Dwell

Time.

•

All-day Playback: play back the recorded videos for current day.

•

Aux/Main output switch: the DVR will check the connection of the output interfaces to define the main and

auxiliary output interfaces. When both HDMI and VGA are connected, or either one is connected, it is used

as the auxiliary video output for live view, playback, recording and PTZ controls; When both HDMI and

VGA are not connected, it is used as the main video output for live view playback, recording, PTZ control

and menu operations.

When the aux output is enabled, the main output can‟t do any operation, and you can do some basic

operation on the live view for the Aux output.

3.2.1 Front Panel Operation

Table3. 2 Front Panel Operation in Live View

Functions

Front Panel Operation

Show single screen

Press the corresponding Alphanumeric button. E.g. Press 2 to display only the screen

for channel 2.

Show multi-screen

Press the 9WXYZ/PREV button.

Manually

switch

screens

Next screen: left direction button.

Previous screen: right direction button.

Auto-switch

Press

Enter

button.

All-day playback

Press PLAY button.

Switch between main
and aux output

Press

2ABC/F1

button.

3.2.2 Using the Mouse in Live View

Table 3.3 Mouse Operation in Live View

Name

Description

Enter the main menu of the system by right clicking the mouse.

Single Screen

Switch to the single full screen by choosing channel number from the dropdown list.

Multi-screen

Adjust the screen layout by choosing from the dropdown list.

Previous Screen

Switch to the previous screen.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands