Euro Video EVD-16/400A1DH Series User Manual Download Page 109

Page: 109 / 196

User Manual of EVD-16/400A1DH Series DVR

108

7.1.3 Backing up by Event Search

Purpose:

Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer), SATA writer

or e-SATA HDD. Quick Backup and Normal Backup are supported.

Steps:

Enter Export interface.

Menu>Export>Event

Select “Alarm Input” from the dropdown list of Event Type.

Select the alarm input No. and time.

Press

Search

button to enter the Search Result interface.

Figure 7.20 Event Search for Backup

Select record files to export.

Select an alarm input in the list and press

Quick Export

button to enter Export interface.

Pressing

Details

button will take you to the interface with detailed information of all channels

triggered by the selected alarm input.

Note:

Event types contain Alarm Input and Motion.

Pressing

Quick Export

button will export record files of all channels triggered by the selected

alarm input.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands