Euro Video EVD-16/400A1DH Series User Manual Download

Page: 187 / 196

User Manual of EVD-16/400A1DH Series DVR

186

13.2 Configuring General Settings

Purpose:

You can configure the BNC output standard, VGA output resolution, mouse pointer speed in Menu >

Configuration > General interface.

Steps:

Enter the General Settings interface.

Menu > Configuration > General

Select the

General

tab.

Figure 13.2 General Settings Interface

Configure the following settings:

•

Language:

The default language used is

English

•

CVBS Output Standard:

Select the CVBS output standard to NTSC or PAL, which must be the

same with the video input standard.

•

Resolution:

Select the output resolution, which must be the same with the resolution of the

monitor screen.

•

Time Zone:

Select the time zone.

•

Date Format:

Select the date format.

•

System Date:

Select the system date.

•

System Time:

Select the system time.

•

Mouse Pointer Speed:

Set the speed of mouse pointer; 4 levels are configurable.

•

Enable Wizard:

Enable/disable the Wizard when the device starts up.

•

Enable Password:

Enable/disable the use of the login password.

Click the

Apply

button to save the settings.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands