Euro Video EVD-16/400A1DH Series User Manual Download

Page: 30 / 196

User Manual of EVD-16/400A1DH Series DVR

3.1 Introduction of Live View

Live view shows you the video image getting from each camera in real time. The DVR will automatically enter

Live View mode when powered on. It is also at the very top of the menu hierarchy, thus hitting the ESC many

times (depending on which menu you‟re on) will bring you to the Live View mode.

Live View Icons

In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the

record and alarm in the channel, so that you can find problems as soon as possible.

Table 3.1 Description of Live View Icons

Icons

Description

Alarm (video loss, tampering, motion detection or sensor alarm)

Record (manual record, schedule record, motion detection or alarm triggered record)

Alarm & Record

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands