Euro Video EVD-16/400A1DH Series User Manual Download Page 35

Page: 35 / 196

User Manual of EVD-16/400A1DH Series DVR

3.3 Adjusting Live View Settings

Purpose:

Live View settings can be customized according to different needs. You can configure the output interface, dwell

time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.

Steps:

Enter the Live View Settings interface.

Menu> Configuration> Live View

Figure 3.6 Live View-General

The settings available in this menu include:

•

Video Output Interface:

Designates the output to configure the settings for. Outputs include

VGA/HDMI, Main CVBS and Spot Output1.

•

Live View Mode:

Designates the display mode to be use for Live View.

•

Dwell Time:

The time in seconds to

dwell

between switching of channels when enabling

auto-switch in Live View.

•

Enable Audio Output:

Enables/disables audio output for the selected video output.

•

Event Output:

Designates the output to show event video.

•

Full Screen Monitoring Dwell Time:

The time in seconds to show alarm event screen.

Setting Camera Order

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands