Euro Video EVD-16/400A1DH Series User Manual Download

Page: 43 / 196

User Manual of EVD-16/400A1DH Series DVR

Click

to save the key point to the patrol.

Repeat the above steps to add more key points.

You can also delete all the key points by clicking the trash icon

Figure 4.8KeyPoints Deletion

4.2.4 Calling Patrols

Purpose:

Calling a patrol makes the PTZ to move according the predefined patrol path.

Calling patrol in the PTZ setting interface:

Steps:

In the PTZ setting interface.

Menu> Camera> PTZ> More Settings

Select the patrol number, and then click

to call the patrol.

Click

to stop it.

Figure 4.9 Calling Patrol

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands