Euro Video EVD-16/400A1DH Series User Manual Download

Page: 75 / 196

User Manual of EVD-16/400A1DH Series DVR

Figure 5.41 HDD General- Editing

Note:

To edit HDD property, you need to set the storage mode of the HDD to Group. See

Chapter Managing

10.4 HDD Group.

Set the HDD to Read-only.

Click

to save settings and back to the upper level menu.

Note:

You can‟t save any files in a Read-only HDD. If you want to save files in the HDD, change the property

to R/W.

Note:

If there is only one HDD and is set to Read-only, the DVR can‟t record any files. Only live view mode is

available.

If you set the HDD to Read-only when the DVR is saving files in it, then the file will be saved in next R/W

HDD. If there is only one HDD, the recording will be stopped.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands