Euro Video EVD-16/400A1DH Series User Manual Download

Page: 117 / 196

User Manual of EVD-16/400A1DH Series DVR

116

Select a record file in the backup device and press button

to play it.

Press

Format

button to format the backup device.

Note:

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

Figure 7.38 USB Flash Drive Management

Management of USB writers and SATA writers

Enter Search Result interface of record files.

Menu>Export>Normal

Set search condition and press

Search

button to enter Search Result interface.

Note:

At least one channel shall be selected.

Figure 7.39 Normal Video Search for Backup

Select record files you want to back up.

Press

Export

button to enter Export interface.

Note:

At least one record file shall be selected.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands