Euro Video EVD-16/400A1DH Series User Manual Download

Page: 91 / 196

User Manual of EVD-16/400A1DH Series DVR

30s reverse

Speed down

Speed up

Previous tag

Next tag

Tag search

Hide toolbar

Exit

Process bar

Video type bar

Note:

Playback process bar: use the mouse to click any point of the process bar or drag the process bar to locate

special frames.

About video type bar:

represents normal recording (manual or schedule);

represents event recording

(motion, alarm, motion | alarm, motion & alarm).

6.1.6 Playing Back by System Log

Purpose:

Play back record file(s) associated with channels after searching system logs.

Steps:

Enter Log Search interface.

Menu>Maintenance>Log Search

Set search time and type and press

Search

button.

Figure 6.29 System Log Search Interface

Choose a log with record file and press

button to enter Playback interface.

Note:

If there is no record file at the time point of the log, the message box “no related record file” will pop

up.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands