Euro Video EVD-16/400A1DH Series User Manual Download

Page: 74 / 196

User Manual of EVD-16/400A1DH Series DVR

Find the record files you want to protect, and then click the

icon which will turn to

indicating that the file is locked.

Note:

Only the record files with size bigger than 1GB can be locked, otherwise it can‟t be

protected by locking it.

Click

to change it to

to unlock the file and the file is not protected.

Figure 5.39 Unlocking Attention

Protect file by setting HDD property to Read-only

Steps:

Enter HDD setting interface.

Menu> HDD

Figure 5.40 HDD General

Click

to edit the HDD you want to protect.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands