Euro Video EVD-16/400A1DH Series User Manual Download

Page: 144 / 196

User Manual of EVD-16/400A1DH Series DVR

143

Steps:

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

More Settings

tab to enter the More Settings interface, as shown in Figure 9.14.

Figure 9.13 More Settings Interface

Enter

Alarm Host IP

and

Alarm Host Port

in the text fields.

The

Alarm Host IP

refers to the IP address of the remote PC on which the Network Video Surveillance

Software (e.g., iVMS-4000) is installed, and the

Alarm Host Port

must be the same as the alarm

monitoring port configured in the software (default port is 0).

Figure 9.14 Configure Alarm Host

Click the

Apply

button to save and exit the interface.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands