Euro Video EVD-16/400A1DH Series User Manual Download

Page: 68 / 196

User Manual of EVD-16/400A1DH Series DVR

Figure 5.30 Edit Schedule- Motion| Alarm

To schedule an all-day recording, select the checkbox after the

All Day

item

To arrange other schedule, leave the

All Day

checkbox blank

and set the Start/End time.

Note:

Up to 8 periods can be configured for each day. And the time periods can‟t be overlapped each other.

Repeat the above steps to schedule for all the week. If the schedule can also be applied to other days, click

Copy

Click

Apply

to save settings.

Click

to back to the upper level menu.

Repeat the above steps to schedule Motion | Alarm or Motion & Alarm triggered recording/capture to other

channels. If the setting can also be applied to other channels, click

Copy

and then choose the channel numbers.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands