Euro Video EVD-16/400A1DH Series User Manual Download Page 180

Page: 180 / 196

User Manual of EVD-16/400A1DH Series DVR

179

You can click the

button of each log or double click it to view its detailed information, as shown in

Figure 9. And you can also click the

button to view the related video files if available.

Figure 12.9 Log Details

If you want to export the log files, click the

Export

button to enter the Export menu, as shown in Figure

12.10.

Figure 12.10 Export Log Files

Select the backup device from the dropdown list of

Device Name

Click the

Export

to export the log files to the selected backup device.

You can click the

New Folder

button to create new folder in the backup device, or click the

Format

button

to format the backup device before log export.

Note:

Please connect the backup device to DVR before operating log export.

The log files exported to the backup device are named by exporting time, e.g.,

20110514124841logBack.txt

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands