Euro Video EVD-16/400A1DH Series User Manual Download

Page: 42 / 196

User Manual of EVD-16/400A1DH Series DVR

Choose preset in the

Preset

list.

4.2.3 Customizing Patrols

Purpose:

Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before moving

on to the next key point. The key points are corresponding to the presets. The presets can be set following the steps

above in

Customizing Presets

Steps:

Enter the PTZ Control interface.

Menu>Camera>PTZ>More Settings

Select patrol number.

Select the

under Patrol option box to add key points for the patrol.

Figure 4.6 PTZ- Add Key Point

Configure key point parameters, such as the key point No., duration of staying for one key point and speed of

patrol. The key point is corresponding to the preset. The

Key Point No.

determines the order at which the

PTZ will follow while cycling through the patrol. The

Duration

refers to the time span to stay at the

corresponding key point. The

Speed

defines the speed at which the PTZ will move from one key point to the

next.

Figure 4.7 Key point Configuration

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands