Euro Video EVD-16/400A1DH Series User Manual Download

Page: 52 / 196

User Manual of EVD-16/400A1DH Series DVR

Figure 5.6 Encoding Parameters for Capture

Configure the parameters.

Click

Apply

to save the settings.

If the parameters can also be used to other channels, click

Copy

to copy the settings to other channels.

Note:

The interval is the time period between two capturing actions. You can configure all the parameters on

this menu on your demand.

5.2 Configuring Record/Capture Schedule

Purpose:

Set the record schedule, and then the camera will automatically start/stop recording according to the configured

schedule.

Steps:

Enter the Record Schedule interface.

Menu>Record>Schedule

Configure Record Schedule

Select Record/Capture Schedule.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands