Euro Video EVD-16/400A1DH Series User Manual Download

Page: 116 / 196

User Manual of EVD-16/400A1DH Series DVR

115

7.3 Managing Backup Devices

Management of USB flash drives, USB HDDs and eSATA HDDs.

Enter Search Result interface of record files.

Menu>Export>Normal

Set search condition and press

Search

button to enter Search Result interface.

Note:

At least one channel shall be selected.

Figure 7.36 Normal Video Search for Backup

Select record files you want to back up.

Click

Export

button to enter Export interface.

Note:

At least one record file shall be selected.

Figure 7.37 Result of Normal Video Search for Backup

Backup device management.

Press

New Folder

button if you want to create a new folder in the backup device.

Select a record file or folder in the backup device and press button

if you want to delete it.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands