Euro Video EVD-16/400A1DH Series User Manual Download

Page: 94 / 196

User Manual of EVD-16/400A1DH Series DVR

Figure 6.31 Right-click Menu under Playback

You can press button

to set the full screen as target searching area. After drawing area(s), press button

to execute smart search in this area.

Note:

Multi-area and full-screen searching modes are supported.

Figure 6.32 Draw Area of Smart Search

Results of intelligent analysis:

Video type bar:

: Normal record file;

: Event record file;

: Dynamic record file.

The hidden list of record files displays when moving the mouse to the right of the playback interface.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands