Epson SC-F2000 Series User Manual Download Page 3

Page: 3 / 104

Contents

Important Safety Instructions. . . . . . . . . . . . . . . . . 5

When choosing a place for this product. . . . . . . . 5
When  setting  up  this  product. . . . . . . . . . . . . . .  5
When  using  this  product. . . . . . . . . . . . . . . . . . .  5
When  handling  the  ink  cartridges. . . . . . . . . . . .  6

Note on this Guide. . . . . . . . . . . . . . . . . . . . . . . . . 6

Meaning of Symbols. . . . . . . . . . . . . . . . . . . . . . 6
Operating System Versions. . . . . . . . . . . . . . . . . 6

Printer Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front  section. . . . . . . . . . . . . . . . . . . . . . . . . . .  7
Interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
Rear  section. . . . . . . . . . . . . . . . . . . . . . . . . . .  11
Control  panel. . . . . . . . . . . . . . . . . . . . . . . . . .  13
Screen  View. . . . . . . . . . . . . . . . . . . . . . . . . . .  15

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

High  Productivity. . . . . . . . . . . . . . . . . . . . . . .  16
High  Reliability. . . . . . . . . . . . . . . . . . . . . . . . .  16
High  Resolution. . . . . . . . . . . . . . . . . . . . . . . .  16
Ease-of-Use. . . . . . . . . . . . . . . . . . . . . . . . . . .  17

Notes on Usage and Storage. . . . . . . . . . . . . . . . . . 17

Installation  space. . . . . . . . . . . . . . . . . . . . . . .  17
Notes  for  using  the  printer. . . . . . . . . . . . . . . . .  17
Notes  for  when  not  using  the  printer. . . . . . . . .  18
Notes  on  Handling  Cartridges. . . . . . . . . . . . . .  19
Notes  on  Handling  White  Ink. . . . . . . . . . . . . .  19
Notes  on  Handling  T-shirts  (Media). . . . . . . . .  20

Using the Software. . . . . . . . . . . . . . . . . . . . . . . . 21

Contents  of  the  Software  Disc. . . . . . . . . . . . . .  21
Using  EPSON  LFP  Remote  Panel  2. . . . . . . . . .  22
Removing  the  Software. . . . . . . . . . . . . . . . . . .  22

Basic Printing

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Necessary Items. . . . . . . . . . . . . . . . . . . . . . . . . . 25

Pre-treatment. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Using  Pre-treatment  Liquid. . . . . . . . . . . . . . . .  26
Fixating the Pre-treatment Liquid (Heat Press)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  29
Preparing  the  Printer. . . . . . . . . . . . . . . . . . . . .  30

Creating and transmitting data. . . . . . . . . . . . . . . 31

Areas that Cannot be Printed. . . . . . . . . . . . . . . 31
Notes on Transmitting and Receiving Data. . . . 31

From Photoshop/Illustrator. . . . . . . . . . . . . . . . 32
From other software applications. . . . . . . . . . . . 32

Load the T-shirt (media). . . . . . . . . . . . . . . . . . . . 32

Replacing  the  Platen. . . . . . . . . . . . . . . . . . . . .  32
Loading  on  the  Platen. . . . . . . . . . . . . . . . . . . .  33
Adjusting  the  Height. . . . . . . . . . . . . . . . . . . . .  35

Starting and Canceling Printing. . . . . . . . . . . . . . . 37

Starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Canceling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Post-treatment. . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Removing the T-shirt. . . . . . . . . . . . . . . . . . . . 38
Fixating the Ink. . . . . . . . . . . . . . . . . . . . . . . . . 38

Other Printing Methods

Printing from a USB Memory Stick. . . . . . . . . . . . 40

USB  memory  requirements. . . . . . . . . . . . . . . .  40
Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40
Deleting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41

Printing on Thick Material (Media). . . . . . . . . . . . 41

Removing the Labeled Round Part. . . . . . . . . . . 41
Installing the Labeled Round Part. . . . . . . . . . . 43

Maintenance

Adjusting the Print Head and so on. . . . . . . . . . . . 44

Checking  for  clogged  nozzles. . . . . . . . . . . . . . .  44
Cleaning  the  print  head. . . . . . . . . . . . . . . . . . .  45
Correcting  the  print  misalignment. . . . . . . . . . .  46

Periodic Maintenance. . . . . . . . . . . . . . . . . . . . . . 48

Cleaning the Printer. . . . . . . . . . . . . . . . . . . . . . . 68

SC-F2000 Series User’s Guide

Contents

Summary of Contents for SC-F2000 Series









































































































Search results

Summary of Contents for SC-F2000 Series

Reviews:

Related manuals for SC-F2000 Series

Brands by name

Popular brands

Epson SC-F2000 Series, User Manual

Search results

Summary of Contents for SC-F2000 Series

Reviews:

Related manuals for SC-F2000 Series

Brands by name

Popular brands