U
Loading on the Platen
A
Check that the platen is ejected forward.
If it is not ejected, press the
}
button to move the
platen forward.
B
Remove the platen's frame.
C
Load the T-shirt so that the shoulders are at the
front.
D
Smooth out the print surface so that it is flat.
E
Attach the platen frame again.
c
Important:
There may be lint on the T-shirt if you have
not applied pre-treatment liquid. Remove the
lint using the sticky tape or roller and press the
fibers flat using the hard roller. Lint and fibers
may stick to the print head and stain other
areas.
F
Smooth out any creases and slack to make the
printing surface flat.
SC-F2000 Series User’s Guide
Basic Printing
33
